Heart Rate Receiver

WaterRower Heart Rate Receiver to allow utilisation of heart rate controls features of the S4 workout monitor.

Forget loosing signal and fumbling around to see your heart rate on a wrist receiver, do the sensible thing and purchase a genuine WaterRower heart rate receiver to plug into the back of your WaterRower's S4 Monitor.

The system displays the the Heart Rate in lieu of the stroke rate for 7 seconds in 10. Input the heart rate upper limit and heart rate lower limit. An audible and visual signal is produced when you are outside the zones limits.

• INSTALL DETAILS: Note, the manual that comes with the HRM can be a bit confusing as it references an orange dot to be facing up: "The receiver box should be orientated so that the joint in the box is horizontal (parallel with the top of the rail) and the circle on the side of the receiver box facing up." however, as detailed on the picture above, the CE mark is where the orange dot should be so this needs to be on the top of the reciever. (this often makes the "Polar" logo on the end of the reciever appear the wrong way up, but don't worry, that's just a sticker and of no significance). If you are still un-certain or the design changes again just give us a call in the shop on 01179 118 139 and we'll sort you out.

NOTE: We (GymRatZ) currently offer a FREE Heart Rate Receiver and Polar T31 Chest Strap with the purchase of every NEW WaterRower (Natural Ash, Classic Walnut, Oxbridge Cherry. M1 Low & Hi Rise & the designer S1 Stainless Steel model !!

Heart Rate Receiver for use with S4 Monitor only (NOTE: Polar T31 Chest Strap sold separately).

All contents of this page are Copyright of GymRatZ Commercial Gym Equipment & Bodybuilding-Supplements 1999-2020